SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklift
Used Forklift Parts - Inevitably, forklift parts will eventually wear out and require replacing. The option of buying new components could become pricey so one more idea is to buy used parts. This can save a lot of cash in the long run. It is a great idea to obtain used lift truck parts which have been remanufactured. These parts would guarantee that you are getting components that will work for a long time and be productive.
Remanufacturing broken and worn out parts is a cheaper method in general compared to rebuilding. With rebuilding components, just the components that are broken or worn out get changed, which means that other wearable components can break down soon after acquisition.
Remanufacturing however offers the best guarantee for second-hand parts. Remanufactured parts are taken apart and cleaned and then all wearable pieces are replaced. All wearable components are replaced regardless of age or wear which is another reason why reproduced components on the whole operate so much better. Whatever component within the part is new and this provides far longer life to the used part. Based on the forklift parts which are being redone, the cleaning process and the complete remanufacturing process would vary.
After complete disassembly, the engines are oven cleaned. Several components of the engine like for example pistons, spark plugs, rings, valve springs, filters, and valves could be replaced during the remanufacture process. The engines are hot tested after reassembly to guarantee that there are no leaks, no noises, no oil pressure problems or any vacuum.
Transmissions are one more item that is oven cleaned after being disassembled. The transmission is then pressure washed. A comprehensive examination is done to check for any cracks. Bushings, seals and bearings are all replaced. Typically, the replacement components utilized on transmission components meet OEM specifications.
A few forklift parts like for instance the water pump, torque converters, the alternator, steer axles and the starter can be quite serviceable after worn parts are replaced. The electronic control in the electric lift truck is maintained by the control card. This particular card can also be remanufactured with replacing all aged and worn out parts. Not like different lift truck parts the control card can only have the worn and aged components replaced.
Remanufactured components are comprehensively examined upon reassembly to ensure they are in top condition prior to being sold. It is vital when acquiring reproduced parts to make sure they have undergone the proper testing and inspection procedures. On certain larger parts like transmissions, steer axles and engines, OEM specification replacement components should be used.
The dealer of used lift trucks and parts can ensure that the remanufactured components have met OEM specifications and that these components meet industry standards. A lot of details go into remanufacturing second-hand components. This attention to detail provides more serviceability out of reproduced components opposed to the parts that were just rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Saskatoon, Saskatchewan
forkliftpartssaskatoon.ca
Email Us
About Us